Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Murray Hill
If your Murray Hill apartment runs hot in one room and cold in the next, or you’ve noticed dust settling faster than it should, the ducts are the first place we look. Murray Hill is mostly 1910s – 1930s pre-war buildings, and the ductwork inside them has been quietly losing air for decades. We know this neighborhood well: the walk-ups off Lexington, the elevator co-ops near East 37th, the converted brownstones tucked between the taller buildings. Our technicians have up to 9 years of experience tracking down air leaks in exactly this kind of housing. Call (855) 552-7560 and we’ll get you a free estimate.
Why Murray Hill Homeowners Call Air Duct Cleaning Upper West Side for Duct Repair & Sealing
Murray Hill residents and property managers call us because we treat duct repair as the full air pathway, not a patch job on one vent. We bring Rotobrush contact-cleaning systems and Nikro commercial vacuums, so we can camera-inspect a run, agitate and extract the debris, then seal the gaps that were causing the loss in the first place. That sequence matters in a pre-war building where a crushed stub behind plaster is the real problem and a simple surface clean won’t touch it.
We coordinate with supers and managing agents as a normal part of the job in Murray Hill. That means showing proof of insurance when a 10016 building asks for it, scheduling chase access around other units, and documenting what we found with before-and-after photos. The local pro we connect you with is licensed and insured as the state requires, and you get one flat price per system agreed before work starts. No per-vent pricing, no surprise line items after the technician is in your hallway.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Murray Hill
This is where the real work happens in Murray Hill. Our duct repair & sealing team handles the full scope, from a single separated joint inside a shared riser to a whole in-unit run that’s lost its insulation. Here are the four services Murray Hill buildings call for most.
Duct Sealing in Murray Hill
In Murray Hill co-ops, sealing is usually the deeper fix, because a clean duct that still leaks sends conditioned air into the wall cavity. We seal seams, joints and pinhole leaks under negative pressure so dust and air stay where they belong. It’s the difference between a duct that looks clean and one that actually holds pressure.

Flex Duct Repair in Murray Hill
Some converted brownstones and postwar units around Murray Hill use flex duct, and it’s prone to kinks, sagging and torn outer jackets where it bends around a chase. A crushed flex run delivers a fraction of the air it should. We replace the damaged section and re-support it so the run stays open.

Metal Duct Repair in Murray Hill
Murray Hill’s original galvanized and sheet-metal ducts are the heart of the problem here. Decades of humid summers, cold winters and radiator soot corrode the seams and pull joints apart inside the shared riser. We reseal separated metal with mastic and mechanical fasteners and re-insulate the run, working under negative pressure so debris doesn’t spread through the unit.

Duct Insulation in Murray Hill
Bare metal stubs running through an unheated chase lose heat fast, which is why some Murray Hill rooms never quite warm up in winter. We re-insulate the run so supply air arrives at the register at close to the temperature it left the unit. It’s a modest job that makes a noticeable difference in a pre-war apartment.
Trusted Brands We Service in Murray Hill
If your Murray Hill apartment already has a Honeywell or Aprilaire air quality system, we’re trained on those controls and know how they interact with the ductwork they’re connected to. For sanitizing work, we use Abatement Technologies air scrubbers and negative-air equipment, the same class of filtration you’d see in mold and disaster remediation. We don’t stock parts on a truck or claim a warehouse, so we won’t promise an overnight fix on a specialty component. What we will do is inspect what’s actually installed, tell you what’s compatible, and give you a written estimate before anything moves.
Common Duct Repair & Sealing Problems We See in Murray Hill Homes
The same failures show up again and again in Murray Hill’s older housing stock. Here’s what we look for.
- Joints pulling apart inside the shared riser. In pre-war co-ops, metal seams corrode over decades and separate where the in-unit stub meets the building chase. Supply air never reaches the register at full pressure, so the room feels weak even when the system is running hard.
- Crushed or disconnected stubs hidden behind plaster. Where a short duct penetrates the chase wall, it can be crushed or simply disconnected, and nobody knows until a camera inspection reveals it. A clean won’t fix it; the run has to be reconnected and sealed.
- Pinhole leaks from condensation and radiator soot. Humid summers and steam radiator heat combine to weaken seam sealant, leaving tiny leaks that add up. Air leaks at this scale are invisible but real, and mastic sealing closes them.
- Lost insulation on bare metal runs. Original uninsulated metal loses heat through a cold chase, so upstairs Murray Hill rooms stay chilly while the rest of the apartment is fine.
In a typical Murray Hill pre-war unit, a camera inspection of the short in-unit stub often reveals galvanized duct that has pulled apart at a joint or been crushed where it passes through the chase, sending conditioned air into the wall cavity instead of the register. Years of radiator soot and humidifier condensation corrode the seams, so a qualified technician usually works under negative pressure, seals the separated metal with mastic and mechanical fasteners, and re-insulates the run, coordinating chase access with the super before any of it starts.
Pricing for Duct Repair & Sealing in Murray Hill, NY
Duct repair here is priced per job by a written estimate, and we give one flat price per system before work starts. To help you plan, here are typical estimates for the Murray Hill market. A single sealed joint or mastic repair on a stub runs about $150 to $350. An air leak repair across a full in-unit run, including negative-pressure work and re-insulation, typically lands between $400 and $900. Replacing a crushed flex or metal section often falls in the $300 to $800 range, and re-insulating an exposed chase run usually comes in around $200 to $600. The final price depends on chase access, how many joints need sealing, and whether a managing agent needs to schedule the work. The written estimate sets the number, and the estimate itself is free.
| Work | Typical Murray Hill Estimate |
|---|---|
| Mastic sealing, single joint or stub | $150 – $350 |
| Air leak repair across a full run | $400 – $900 |
| Flex or metal section replacement | $300 – $800 |
| Duct insulation on exposed chase run | $200 – $600 |
See the difference
Before
After
Before
After
Before
AfterThe Murray Hill Detail That Changes the Job
Most duct repair advice you’ll read assumes a single-family house with its own ductwork. Murray Hill is not that. In the 1910s – 1930s co-ops around 10016, ducts are usually short in-unit stubs feeding off a shared vertical chase or riser, which means a repair rarely ends at the register. Access and sealing often have to be coordinated through the building super or managing agent, and some 10016 buildings require proof of insurance before any duct work begins. Sealing here means sealing the stub at the point it meets the riser, not sealing a sprawling home system, and getting that right starts with knowing whose walls you’re working through. That’s the conversation we have with Murray Hill customers before we touch a thing.
We Also Serve Cities Near Murray Hill
We work across the neighborhoods around Murray Hill, including Kips Bay, Midtown, the Upper East Side, and Hell’s Kitchen. Plenty of these buildings share the same pre-war construction and the same shared-chase problem, so our approach travels well within a few blocks of Murray Hill. If you’re near the boundary, it’s worth a call to confirm coverage.
Serving Murray Hill, NY – Our Local Coverage Area
We serve Murray Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Murray Hill
Original 1920s sheet-metal ducts in Murray Hill can usually be sealed rather than replaced, as long as the metal is intact enough to hold a seal. We clean the run first, then reseal the joints and seams with mastic and mechanical fasteners under negative pressure. If a section is too corroded to seal, we replace just that piece. Call (855) 552-7560 for a free estimate.
Because the chase is often part of a shared building system, so any work on it needs the building’s sign-off. In many 10016 buildings the super or managing agent has to arrange chase access and, in some cases, collect proof of insurance before work begins. Getting that sorted first keeps the job moving. Call us and we’ll walk you through what your building will likely ask for.
The tell is uneven airflow: rooms that don’t heat or cool evenly, or a register that feels weak even with the system running. Dirty ducts show up as dust settling quickly; leaking ducts send air into the wall cavity. A camera inspection settles the question. Call (855) 552-7560 and we’ll check.
Sealing means closing the gaps where conditioned air escapes, not just wiping the duct down. That usually means a camera inspection of the in-unit stub, negative-pressure containment, mastic and mechanical fasteners on separated joints, and re-insulation of the run. It’s a targeted repair, not a whole-home sealing system. Call for a free estimate.
Yes, shared chases are the normal setup in Murray Hill, and we work them regularly. We coordinate access with the super or managing agent, work under negative pressure so nothing migrates into neighboring units, and document the before-and-after. One flat price per system, agreed before work starts. Call (855) 552-7560.
Get a Free Duct Repair Estimate in Murray Hill
If your Murray Hill apartment isn’t heating or cooling the way it used to, the ducts are worth a look before you spend money on anything else. Call (855) 552-7560 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, a plain explanation of what’s wrong, one flat price per system before work starts, and before-and-after photos of your own ducts. The local pro we connect you with is licensed and insured as the state requires, and the written estimate sets the final price. That’s how we do duct repair in Murray Hill.
Written by the team at Air Duct Cleaning Upper West Side.