Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Melrose
If air is leaking out of a seam, drifting in from a neighbor’s apartment, or never reaching the third floor, we can trace it and seal it. We handle duct repair and sealing throughout Melrose, with fast dispatch from 7am to 7pm Sunday through Friday. Most of what we fix here starts in the shared vertical risers that run up through these old walk-ups, not in a single unit’s ductwork. Call (855) 552-7560 and we’ll get a written estimate together. Our technicians have up to 9 years of experience reading exactly this kind of building.
Why Melrose Homeowners Call Air Duct Cleaning Upper West Side for Duct Repair & Sealing
Melrose has a specific set of duct problems, and they come from the building type. These are four to six story walk-ups with a central riser rising out of a basement furnace room, feeding stacked apartments that were never designed to be sealed off from one another. We know that layout, and we plan the job around it instead of treating each apartment like a separate house.
Our work is built on professional-grade equipment, not shop vacuums. We run Rotobrush contact-cleaning systems and Nikro commercial vacuums to agitate and extract debris, and we use Abatement Technologies air scrubbers with negative-air setup so a repair doesn’t push dust into the next apartment. A duct problem in a shared building spreads. Our process is built to keep it where we’re working.
We serve Melrose and the surrounding blocks with fast dispatch from 7am to 7pm, and we can usually schedule a visit that fits around tenants and building managers. The estimate is free, and the price is set per job in writing before any work begins.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Melrose
Repairing ducts in Melrose pre-war buildings means working with old galvanized sheet metal, sections wrapped in aging insulation, and the occasional flex-splice left behind by a past renovation. Here’s what we do.
Duct Sealing
We seal leaking joints in the shared riser and its branches using mastic sealant, which holds up better than tape in the decades-old metal these buildings have. In a Melrose walk-up, sealing is often the real fix, not cleaning, because the pathway between floors is what lets odors and dust move. We test the seal after we’re done so you can see the difference in airflow and pressure.

Flex Duct Repair
Renovated units in Melrose often have flex duct spliced in during a gut rehab, and those runs disconnect, kink, or get crushed behind new walls. A disconnected flex run dumps conditioned air into a wall cavity instead of the room. We reconnect it, replace the damaged section, and support it properly so it stays open.

Metal Duct Repair
Original galvanized trunk sections behind plaster walls can separate at seams or crush after decades of settling. Without a camera inspection, you won’t find them. We scope the trunk line, locate the crushed or separated sections, and repair the metal so the run carries air the way it was meant to.

Duct Insulation
Basement duct runs in these buildings are often poorly insulated, which matters in Bronx summers when humid air condenses on cold metal and encourages mold growth. We address insulation as part of the repair so the run stays dry and the air reaching the apartments stays at the temperature you paid for. If a section needs replacing, we handle it at the same visit.
Trusted Brands We Service in Melrose
If your building has a Honeywell or Aprilaire air quality system tied into the ductwork, we can work with it and repair the pathway around it. We’re trained on both lines and compatible with the whole-home equipment many Melrose buildings and renovated units already have. We don’t claim to stock parts on a truck, but the diagnostic visit usually tells us what’s needed and we plan the repair from there. Air leak repair and mastic sealing are where the biggest gains tend to be, and we quote that work in writing before we start.
Common Duct Repair & Sealing Problems We See in Melrose Homes
The pattern repeats across these buildings, and it comes down to age and shared structure.
- Failed shared riser joints and fire dampers. In pre-war walk-ups, the joints and dampers in the central riser wear out and let odors and dust migrate between stacked apartments even after a clean. Sealing those joints is the fix, not another vacuuming.
- Disconnected flex runs after a gut rehab. Renovated Melrose units often have spliced-in flex duct or blocked registers that were never connected properly. Air ends up in the wall cavity instead of the living space.
- Crushed or separated galvanized trunks. Original sheet-metal trunks behind plaster walls settle and separate over the decades, and standard cleaning misses them without a camera inspection. The leaks persist, and so does the dust.
- Aging insulation on basement runs. Old duct wrap in basement furnace rooms can contain asbestos and has to be identified before any cleaning or agitation disturbs it. We check first, because that’s not something to guess at.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Melrose, NY
Duct repair and sealing in Melrose is priced per job, and the written estimate sets the final price. The ranges below are typical for this market, not a per-vent rate.
| Work | Typical range in Melrose |
|---|---|
| Mastic sealing of accessible riser and branch joints | $250 – $600 |
| Flex duct repair or reconnection (per run) | $150 – $350 |
| Metal trunk repair or section replacement | $300 – $750 |
| Duct insulation replacement on basement runs | $200 – $500 |
| Camera inspection of the shared riser | $150 – $300 |
Cost is driven by how many apartment branches the riser serves, how accessible the trunk is behind original plaster, and whether insulation is present and needs handling. Building-wide coordination with a manager or owner adds planning, not a surcharge. The estimate is free.
We Also Serve Cities Near Melrose
We work across Melrose and the surrounding neighborhoods, including Morrisania, Harlem, East Harlem, and University Heights. The building stock shifts between these areas, and we adjust the approach to each. If you’re on the fence between a clean and a repair, our duct repair & sealing team can take a look and tell you which one actually solves the problem.
Serving Melrose, NY – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Melrose
It’s almost always a duct repair problem. In these shared-riser buildings, smoke crossing between apartments points to failed joints or fire dampers in the central riser, not just accumulated dust. Cleaning won’t close those gaps. Call (855) 552-7560 and we’ll trace the riser floor by floor and give you a written estimate.
We identify it before anything disturbs it. Older duct wrap in basement furnace rooms can contain asbestos, so we inspect and note it during the visit, then plan the repair around it rather than running agitation tools through it. That’s a check we do every time in this building stock. Call (855) 552-7560 to schedule an inspection.
Weak airflow after a gut rehab usually means a disconnected or crushed flex run behind the new walls. Renovations often splice flex duct in without properly connecting or supporting it, so the air dumps into a cavity instead of the room. We inspect, reconnect, or replace the run and confirm the airflow. Call (855) 552-7560 for an estimate.
Yes, and that’s why it has to be coordinated building-wide. Sealing one unit’s riser branch changes the pressure and leakage profile for every stacked neighbor above and below, so the work is planned as a riser conversation, not a single-apartment job. We walk the building, map the branches, and plan the seal so no unit ends up worse off. Call (855) 552-7560 to talk through your building.
A typical job starts with a camera inspection of the shared riser under negative pressure with HEPA filtration. The technician identifies any aging insulation before agitation, then seals the leaking joints with mastic or repairs the failed metal section, and confirms the seal at the end. It’s closer to chasing a chimney than cleaning a house. Call (855) 552-7560 for a free estimate.
Get a Free Estimate on Duct Repair in Melrose
If odors are moving between apartments, airflow is weak after a renovation, or a basement run is leaking air, the fix starts with a proper inspection. We’ll walk the building, show you what we find, and put the repairs in writing before any work begins. Call (855) 552-7560. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Upper West Side.